When purchasing a feed pellet machine, we usually purchase additional pellet dies because the pellet dies bear great pressure during operation and are more prone to problems compared to other components. Once the pellet dies have problems and the output materials do not meet the standards, it is necessary to replace the pellet dies and re pelletize, which indirectly increases the cost of pelletizing. So if the service life of the pellet die can be extended and the number of pellet die replacements can be reduced, it will indirectly reduce the cost of granulation. So how can we make the lifespan of the pellet machine pellet die longer?
1、 Regularly clean the pellet die
After each granulation is completed, the pellet machine pellet die should be cleaned. The general practice is to add the raw materials to oil, mix them into oil, grind them for a period of time, and then fill the pellet die with oil. This not only ensures that the pellet die holes are not blocked, but also facilitates the next startup of the equipment.
2、 Oil should be cleaned when not in use for a long time
Although oil has a protective effect on pellet dies, if the machine is not used for a long time, the added oil will gradually harden, making it difficult to remove it next time it is used. Therefore, if the machine is not used for more than a month, the pellet dies should be removed, cleaned, and stored.
3、 The pellet die storage point should be ventilated and dry
Due to the fact that we usually purchase additional pellet dies when purchasing machines, these pellet dies should be stored in a dry and ventilated place to prevent moisture in the air from reacting with their surface and rusting, which can affect their service life and the appearance of the produced particles.
4、 The motor power needs to be matched
Different models of particle machines are equipped with different motors. During use, it is necessary to use the matching power according to the machine model. If the motor power is too small, the granulation efficiency is low and the particle quality does not meet the standard; If the motor has too much power, it not only wastes electricity but also accelerates mechanical wear, thereby shortening the lifespan of the pellet die.
The pellet die and accessories of Hongyang Feed Machinery pellet making machine are ensured to be at the leading level of pellet die quality and durable by introducing international advanced automated vacuum furnace heat treatment technology, fully automatic CNC ring pellet die drilling machine and other equipment. We can customize accessories such as pellet making machine ring pellet dies and pressure rollers for different countries, models, materials, and industries according to customer requirements. Welcome new and old customers to inquire!
Technical Support Contact Information：
Whatsapp : +8618912316448
E-mail：hongyangringdie@outlook.com
Post time: Dec-19-2023